6 Inch (150mm) Twin Wall Flat Ceiling / Wall Plateのレビュー

6 inch Twin Wall Flat Ceiling / Wall Plate Used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through. Use silicone and screws to secure against the wall. Use for flat walls or ceilings only - for pitched ceilings or where a flue pass through the plate at an angle use the Decorative ceiling / wall plate. Hole Diameter 8 inches EN1856-1 T600 N1 D V2 L50050 G50 Twin Wall flue is manufactured using 0.5mm 316 grade stainless steel for the inner skin and 0.5mm 904 grade stainless steel for the outer skin. The cavity is insulated with 25mm ceramic mineral wool. Twin Wall flue features easy to install twist lock system and parts are secured together by using a Locking Band (supplied). It is also weatherproof and fully sealed so is suitable for internal and external applications. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board). Manufacturer offers a 10 year warranty for complete peace of mind on its Twin Wall flue pipe. This covers any defect due to faulty manufacture provided that the system has been correctly specified, installed, used and maintained in accordance with local building regulations. To maintain the warranty on your chimney system, you must have your chimney system swept annually by an approved chimney sweep and a signed record of this needs to be maintained. In the case of solid fuel installations, your chimney system must only be used with fuels approved and specified by either HETAS or the Solid Fuel Association. Any other fuels will invalidate the warranty. Any chimney fire will also invalidate the warranty and it is always advisable to replace the system following a chimney fire.NB Twin Wall Flue diameter is always taken as the inside diameter.