Johnstone's Revive Metallic Paint - 375mlのレビュー

Overview Johnstone's Revive Metallic Paint does a wonderful job of creating a rich shimmering effect on even the dullest of surfaces. You can use it on its own as an opulent top coat, or layer it with Revive Chalky Furniture Paints and sand off for a distressed look. Use Revive Finishing Wax to add more depth and burnishing, or leave it uncoated for a smooth, metallic shimmer. It works a dream on ornate mirror frames, for a vintage inspired effect. Equally, it's fabulous for reviving tired furniture by adding gold or silver accents. A versatile metallic paint for upcycling projects. Works well to revive candlesticks and vases Highlights furniture with metallic shine No primer or undercoat needed A 375ml tin will cover up to 6 sq metres depending on the nature and porosity of the surface Area Interior Recommended Use Interior furniture and accessories Base Water-Based Coverage up to 14m² per litre. One 375ml tin will cover up to 6 square metres depending on the nature and porosity of the surface Drying Time 2 Hours Re-Coat Time 4 Hours Recommended Coats 1-2 Coats Application Method Brush VOC Levels Low Clean Up Remove as much paint as possible from the equipment before cleaning with water Preparation Clean the surface thoroughly with a mild detergent so that it's free from grease, waxes or polish. Rinse thoroughly with clean water and allow to dry. If you're painting a smooth surface or bare wood, lightly sand with a fine waterproof abrasive paper to provide a key. If covering a previously painted surface, firstly remove any flaking or blistering paint. Again, rub down well with a fine waterproof abrasive paper. Be careful to avoid the inhalation of fine dust particles by wearing a suitable face mask if dry sanding. Application Always test a small area of the surface to be painted to ensure you are happy with the finished results Stir well before use Apply the paint evenly, using brush or roller working in the direction of the wood grain If you're looking for a distressed look, apply one coat of Revive Metallic effect paint, allow to dry Then apply a coat of Revive Chalky Furniture Paint and allow to dry Finally lightly sand / scour to show the layers It's recommended that furniture is protected with Johnstone’s Revive Finishing Waxes Always follow the manufacturer's instructions found on the tin Aftercare & Storage Remove as much paint as possible from your brush or roller before cleaning. Wash immediately after use in warm soapy water and rinse thoroughly.