Eagle Desmopol Liquid Polyurethane Membraneのレビュー

Use Eagle Desmopol Liquid Polyurethane Membrane to waterproof flat roofs, walkways and balconies. The high elastomeric waterproofing liquid membrane is the perfect solution for waterproofing complicated roofs, such as those with detail work. Desmopol Liquid Polyurethane Membrane can be applied wet-on-wet fully reinforced with excellent adhesion to most substrates without the use of primer, including bitumen, GRP, torch-on felts, OSB, single ply, over PIR boards, asphalt or on warm roofs, etc. 15-25yr Guarantee - please see 'Guarantee Information' below for details. Above are two product videos featuring Desmopol Liquid Polyurethane Membrane: Video 1: This video shows a standard 2 coat wet on wet application of Desmopol with Tecnoband Matting It outlines the use of Eagle Tecnotop as the finishing coat and discusses the uses of Desmopol Sealant and Desmothix polymeric thickener during application Video 2: This video shows a 1 coat un-reinforced (without Tecnoband Matting) application of accelerated Desmopol by the inclusion of Desmoplus Additive It outlines the use of Eagle Tecnotop and discusses the anti-slip options available using Anti-Slip Slate Grit and Tecnoplastic Rubber Granules for balconies and walkways Desmothix polymeric thickener is discussed for use during the application of Desmopol Liquid Polyurethane Membrane on pitched or vertical surfaces Quick Links - Click To Jump To Section:     Features & Benefits Applications Application Guides Guarantee Information Features & Benefits Completely waterproof 15-25yr Guarantee - please see 'Guarantee Information' below for details Holds BBA/ETA certification for life expectancy in excess of 25 years Protects against corrosion, rust and wear Easy and quick application. No reinforcement required Can be applied even with zero pitch No seams or overlaps 600% Elongation: High resistance to abrasion and high elasticity Applications Desmopol Liquid Polyurethane Membrane can be used on a variety of surfaces and substrates - please refer to the relevant data sheets for information on application methods and recommendations or give our technical team a call on 0113 2455450. Please see the Application Guides section below for specific application information Wet-on-Wet (Fully Reinforced): Single ply Overlay GRP Plywood/OSB Warm roof over PIR Inverted roof Green roof Torch on felt overlay Asphalt Paving slabs New build waterproofing Recommended Primers - For concrete, EPDM and TPO single ply use PU1000 primer. Important - Silicone-based mastics should not be used as they are incompatible. Accelerated: Only recommended for trained contractors; contact our technical team on 0113 2455450 (option 2) or send a message to technical@rawlinspaints.com before purchasing or using Desmopol in an accelerated application. Others: Asbestos Metals Swimming pools Potable water tanks Transparent-Desmopol T Heavy Traffic Tecnotop 3000 Application Guides Below are specific application guides for Eagle Desmopol (Click to download): Asphalt Overlay - Wet on Wet - Fully Reinforced System Concrete Overlay - Wet on Wet - Fully Reinforced System Existing Asphalt - Accelerated System Existing Concrete - Accelerated System Existing Mineral Felt - Accelerated System Felt Overlay - Wet on Wet - Fully Reinforced System GRP Overlay - Wet on Wet - Fully Reinforced System New Plywood or OSB - Accelerated System New Roof - Wet on Wet - Fully Reinforced System Guarantee Information 15 Year Guarantee - Minimum 1.5kg/m² Eagle Desmopol Liquid Polyurethane Membrane fully reinforced with Eagle Tecnoband 225g Matting or applied at minimum 1.5kg/m² using Eagle Desmoplus and using Eagle Tecnoband 225g Matting on all joints and detail work. Finished with Eagle Tecnotop 2C at 150-200 g/m² once the Desmopol has cured fully (minimum 3 hours with Desmoplus, 24 hours without) 20 Year Guarantee – As above but the contractor must be trained on the product (contact us for details, costs associated for training) 25 Year Guarantee - Minimum 2kg/m² Eagle Desmopol Liquid Polyurethane Membrane made up of the following: Initial application 1.5kg/m² Desmopol fully reinforced with Eagle Tecnoband 225g Matting or applied at minimum 1.5kg/m² using Eagle Desmoplus and using Eagle Tecnoband 225g Matting on all joints and detail work Additional coat of Desmopol (without matting, Desmoplus optional) 0.5kg/m² after the initial application has cured (minimum 3 hours with Desmoplus, 24 hours without)  Final coat of Eagle Tecnotop 2C to finish at 150-200 g/m² Contractor must be trained on the product In all cases the customer must register the job to get the guarantee using the ‘Guarantee Requisition’ form available to download Once complete, the form should be sent to technical@rawlinspaints.com