Polycell Polyfilla Deep Gap Filler - 1 Litreのレビュー

Overview Easily fill deep gaps and holes, up to 20mm, in just one application. Ideal for use on most interior surfaces including plaster, masonry, cement, stone, and wood the sag-resistant formulation makes application a breeze. Once dry it can be sanded to a smooth finish that will accept nails or screws. Fills in one application Files holes up to 20mm Drillable and accepts nails or screws Can be used on deeper holes but will need to be built up in layers, allowing to dry between applications Area Interior Recommended Use Fill deeps gaps in interior plaster, masonry, cement, stone and wood. Drying Time 1-2 Hours Re-Coat Time 1-2 Hours Recommended Coats As required Application Method Filling knife or spatula VOC Levels Minimal Clean Up Remove excess from tools before cleaning in warm water Preparation Always ensure the surface to be filled is free from dirt and any contaminates that may effect adhesion. Ensure the surface and cracks are free from any loose material. Prime nails and screw heads with a suitable metal primer. Application Always follow the manufacturer's instructions found on the tub. Stir thoroughly before use to a creamy consistency. Press well into the hole with a filling knife, smoothing over. Do not overfill and ensure the filler is level with the surface. For deeper repairs above 20mm - build up in layers allowing to dry between applications. Allow to fully dry, if necessary sand down to a smooth finish.